TORSION PRING
What’s T orsion spring? Torsion springs , whose ends are rotated in angular deflection, offer resistance to externally applied torque. The wire itself is subjected to bending stresses rather than t...
Read More
EXTENSION SPRING
What’s Extension spring? Extension springs are made from different qualities of wire and are tightly coiled and usually made in round, cylindrical sections. To use an extension spring, you must att...
Read More
Custom Compression Springs
What’s compression spring? Compression spring is a coil spring. Both ends can be open or closed. The shapes of compression springs are cylindrical, conical. The middle convex shape, middle concave ...
Read More
Introduce Several Methods To Improve The Service Life Of Springs
Whether the spring is in use or in production, it is necessary to consider its service life. If the service life of the spring produced by the manufacturer is very short, it means that the quality ...
Read More
How To Use Stainless Steel Spring Correctly?
Different stainless steel spring manufacturers have different methods for the use of springs. If a certain limit is exceeded, it will cause damage to the spring. For example, for a stainless steel ...
Read More
Precautions For Custom Processing Of Springs
1. The spring cannot be tempered by increasing the temperature and shortening the time. 2. Hardness: With the increase of tempering temperature, the hardness decreases after a slight increase. The ...
Read More
Compression Spring Applications
Wire springs for compression springs are used in everything from home appliances to motorized equipment, motors, etc. as it is the type of spring required. By the load acting on them or their ends ...
Read More
Spring Standard Catalog
GB/T 1239.2-1989 Technical conditions for cold-rolled cylindrical helical compression springs GB/T 1239.3-1989 Technical conditions for cold rolled cylindrical helical torsion springs GB/T 1239.4-1...
Read More
Compression Spring Production Design
1. Look at the actual product requirements and choose the spring material by yourself. 2. According to the product requirements, determine the inner and outer diameter of the spring, the number of ...
Read More









